EOU System
EOU System
Installing an electric water-heating the heating flow type EOU - designed to heat the coolant in closed water heating systems (self heating) houses, apartments, country houses, garages, industrial, storage and other facilities without the use of the circulating pump. The electrical installation is unique. It's clean, modern, self-contained, highly economical, reliable, and small-sized heating equipment. The water heating system, mounted on the base of the EOU, different economy, so the space heating will cost you two or three times cheaper than using a boiler with liquid and solid fuels (coal, fuel oil, firewood), electric boilers and electrical systems for air heating. BENEFITS: The use of the EOU heating element of special alloys, which is based on the newest technologies, thanks to this, the EOU has high efficiency - 98%.One kilowatt of power heats the EOU 60 cubic meters. m. (20 sq. km. m). Duration of EOU in the system of water heating from 1 to 8 hours a day, depending on the ambient temperature (automatic with sensor-thermostat), so when heating area of 40 to 750 square meters.
m. consumption per day ranges from 2 to 288 kW / h (depending on model, see table of characteristics). EOU during operation in the Hot-water heating system provides heated coolant rise to a height of 3 to 24 meters (depending on model), due to the large difference in temperature at the inlet and outlet electrical, which allows heat single-storey and multi-storey premises without the use of circulating nasosov.EOU suitable for different types of water systems in and out of the EOU otopleniya.Vhod mounted in a water-heating through plumbing couplings plumbing adapters or plumbing pipes. Log EOU is mounted in the back line and exit in the feed line system of water otopleniya.V system of water heating, which is already installed boiler (boilers), EOU mounted in parallel to the boiler (boilers). The water heating system with forced circulation pump installed in the return line water heating system to work on elektroustanovkoy.Vse installation of electrical systems in hot-water heating system are held in the same way as with conventional electric boilers, gas boilers, furnaces and electrical t.d.Temperatura output: up to 95 C. 1. Working environment (coolant) and water ice-liquid water heating systems. 2. Operating voltage: 220/380 V 10%. 3. Length (single-phase modification): 300 mm. 4. Connection sizes: entrance G1 ", exit G1 ". 5. Length (three-phase modification): 400 mm. 6. Connection dimensions: input G1 ", exit G1 ". The delivery of the EOU is: 1. The electrical (EOU) - 1 pc. 2. Sensor-thermostat (thermostat) - 1 pc. 3. Passport (manual) - 1 copy. 4. Individual box - 1 pc.
