After all my friends saw that I had fixed my Xbox 360 and rescued it from the dreaded three red lights curse, I sent them the link to James Dean’s 3 Red Light Fix and they were off and running to fix their own Xbox 360s!
The Xbox 360 Red Light Fix repair guide will introduce you to a dual-stage fix that ensures a 99.9% success rate. It will walk you through, step-by-step on how you can effect the right fix for your beloved console. The videos and clearly written, illustrated eBook will have you putting an end to the most common Xbox 360 errors.
Visit the Xbox 360 Red Light Fix website today and get a copy of the ultimate Xbox 360 repair guide before your Xbox dies for good!
Here are a few things that I was unsure about:
* The first thing I didn’t like was it would take 2 hours for me to sit down and repair my game system on my own; and
* I was hesitant about some of the steps inside the guide.
If you’ve got blinking red lights on your Xbox 360, have no worries it’s something that can be easily fixed.
The Xbox 360 Red Light Fix repair guide will introduce you to a dual-stage fix that ensures a 99.9% success rate.
I am not a technical person so when my Xbox 360 suffered the famous red ring of death I thought I was done for.
If you want a repair guide that will fix the 3 red lights than this guide will do just that.
All in all, not a nice thing to happen to your expensive 360, and unfortunately not an uncommon problem.
The 3 Red Light Fix costs a few bucks. This gives you membership to the 3 Red Light Fix website, access to two PDF eBooks with detailed steps, and access to three videos as well as:
* 3 Red Light Fix Repair Guide PDF;
* XClamp Repair Guide PDF;
* The Disassembly Video;
* The XClamp Repair Video; and
* Another XClamp Repair Video.
There can be a number of reasons why your Xbox 360 is experiencing ‘RED RING OF DEATH’. It could be an individual problem, or several problems working together to cause this problem. Here are a few reasons why an Xbox 360 may fail:
* Overheating - The Xbox 360 mother board is similar to that of a regular Desktop PC with a powerful graphics chip. The only problem is that they can’t dissipate the heat that the graphics chip is producing like a Desktop PC can. The heat sinks get so hot that they melt the thermal compound between them and the graphics chip. This causes the graphics chip to come in direct contact with the heat sink that get so hot that you can literally fry an egg on them;
* Faulty X Clamps - There are two clamps called X clamps that hold down the GPU (Graphics Processing Unit) and the CPU (Central Processing Unit). They don’t do such a good job when it comes to holding the heat sinks that are suppose to cool these chips down; or
* Lead Free Solder - Another problem the Xbox 360 has with heat is that it causes the motherboard to flex. When this happens it stresses the solder joints causing micro cracks. This results in poor connections to the tiny resistors under the graphics chip.
Here’s a few things you can try to revive your XBox:
* Turn off the console and unplug the power cable from the wall plug;
* Place your Xbox 360 flat so that the cooling vents are not blocked in any way and keep your Xbox 360 in a ventilated and open area; and finally
* Try removing any dust buildup inside the machine and cool off your console with a fan. If that doesn’t work, then getting your machine repaired is the only thing you can do.
And then there are the multitudes of YouTube videos claiming to have found the miracle cure. Here are some that seem to be most popular - and ridiculous:
* The Towel Trick - It goes something like this: You take the hard drive off, wrap the entire unit in a towel to prevent the excess heat from escaping, turn the console on for about 15 minutes to cook (some instructions recommend 1 hour!), shut it down, unplug it for an hour, plug it back in and like magic it works. But why? I haven’t heard a decent explanation yet. Here is one of the explanations:
* The unit gets so hot that it melts the solder that was the cause the red lights in the first place.
Here are a couple of potential problems as pointed out in the same instructions:
* Could potentially damage other parts of the Xbox; and
* The unit could catch on fire it gets so hot.
I have to say I am going to rate this as the 2nd most ridiculous fix of the three in consideration. Recommendation: Do not use this fix!
* The Ice Bath - I don’t even want to explain how to do this. Essentially, a Rubbermaid tub is filled with ice water, some vinegar is added, the Xbox 360 is unplugged and submerged in the water/vinegar mixture. After so many minutes the console is removed, drained of water and immediately plugged back in. Need I say more. This as so many other fixes was presented as a youtube video. It is really quite irresponsible and should be removed. This fix is the most ridiculous fix of the three in consideration. My recommendation: Ignore!
* X-Clamp Fix - This is the only legitimate fix I have found thus far. It is as permanent as it gets. Do not use it however if your Xbox 360 is still under warranty. Send the console back to Microsoft and let them honor the warranty. However, if the seal is broken and/or it isn’t under warranty this fix is your best bet. This is the fix in a nutshell; you open up the console, remove the x-clamps, clean up the old thermal paste, put new thermal paste on, replace the x-clamps with screws and washers, reassemble the unit, overheat, let it cool down and it works on approximately 90% of the units. Recommendation: Use this fix.
Fixing the rrod error is an easy task if you follow professional Xbox 360 repair guide. Here I am going to show you step by step actions which will not only save your money it will also save your time.
This is what you can expect to be doing if you decide to fix your own Xbox:
* Disassemble Xbox 360 Case - Using a fine tip screwdriver, poke the grayed out holes in the back of the case (poke the small rectangle holes). Get the Faceplate Off and move the latch up on the DVD drive up as you remove it. Unscrew the metal case which is under the plastic case. The video ‘How to Disassemble Xbox 360 Case’ which comes with James Dean’s Professional Xbox 360 repair guide is easy to follow and to the point. If you are not too comfortable with the ebook instruction, you can use this video to disassemble your Xbox 360 case;
* Remove the Motherboard - Unplug any cables connected to the motherboard and associated small devices;
* Take your take DVD drive out;
* Get the fan and motherboard out of the case. Do this gently :);
* Motherboard Disassembly - Turn the motherboard over and using a screwdriver, remove the X-clamp under heat sink. Do this step VERY gently (If you are not comfortable doing this, refer to the video which comes with James Dean’s 360 repair guide.);
* Applying Arctic Silver - Now you have to apply some arctic silver thermal compound gently over the GPU. You can get arctic silver thermal compound in any computer hardware shop for a couple of bucks. Set it aside for 15 to 20 minutes then place 2 nylon washers on each screw on the heat sink. Place the screws back in the motherboard and add two more nylon washers to screws. Place the heat sink on the tip of the screws and push them down gently. Finally, tighten the screws (not too tight!). Put everything back together, making sure everything is fitted properly. Now, turn your Xbox 360 back on and have some fun.
Start gaming already - Fix your Xbox red ring of death easily! Don’t pay 0 plus shipping for something that virtually anyone can do in under 2 hours.
Find out more about the Red Ring of Death and many of the other common Xbox 360 errors by visiting xbox 360 3 red lights fix review. There’s also a great deal on the xbox 360 3 red lights fix. Last but not least, you can grab a $120 bonus for the xbox 360 3 red lights fix at fixurxbox.com.
Tags: 3 red light fix, fix my xbox 360, xbox 360 3 red lights fix, xbox 360 fix, xbox 360 red lights